A Moomba LSV Detailed & Cleaned

A Moomba LSV Detailed & Cleaned

Haven’t seen one of these in a while. It’s a Moomba LSV! it’s a cool boat, but certain was even cooler after our crew rolled up their sleeves and went to work.

For this particular undertaking we did quite a bit of work on the interior. Let’s face it, and especially once you see the video you’ll see that she was quite dirty.

We cleaned and conditioned the vinyl seats. For this we use an all purpose cleaner that also conditions. It’s a nice combo and we’re quite fond of it. But before we could do this we had to rid the surfaces of any mold or mildew. This is quite common, since, well — boats get wet!

We also vacuumed and cleaned around the cup holders and we certainly made sure that all storage compartments would pass the test. 

The windows were also taken care of and the hull was polished, but prior to this we had power-washed and scrubbed the exterior to prime the surface first.

The final result had this Moomba looking light years beyond where she started at.

Tige Z1 Boat Cleaning

Tige Z1 Boat Cleaning

Recently we had a Tige z1 come through our shop. This boat is equipped with a Wet Sounds audio system and the legendary TAPS Surf System (Tige Adjustable Performance System); which gives you full control over the list, yaw, draw and the overall wake control. This boat is a wake boarder’s dream!

Now it was time for us to step in and do-what-we-do. An in-depth boat cleaning was in store first, so we set to work power washing the cover, steam cleaning the exterior, cleaning down the vinyl throughout the interior of the Tige with an all-purpose cleaner and then cleaning the tower and bimini. Next, we vacuumed every, little crevice and compartment and conditioned the vinyl to keep it hydrated and fresh.

Overall the work was very satisfying and it’s always a sight to behold when you get these boats, like the Tige Z1 out into the open and into the sunlight. They just gleam brighter than the sun!

Detailing a Supra SA350

Detailing a Supra SA350

This 2013 SA350 powered by a 57MR V8 motor is just killer looking. It’s got attitude and a very pleasing design to it and the interior is comfortable, accommodating and attractive. You can’t beat that.

We did quite a bit of work on this boat during the detailing process. The hull was scrubbed and hand-washed first. Then we cleaned all of the interior vinyl and made sure that any cushions were cleaned up to standards.

Next we vacuumed out any and all compartments and proceeded with scrubbing the floor. Finally, the tower and bimini were cleaned and we performed a single-stage polish on the exterior.

Call Now Button