A Moomba LSV Detailed & Cleaned

A Moomba LSV Detailed & Cleaned

Haven’t seen one of these in a while. It’s a Moomba LSV! it’s a cool boat, but certain was even cooler after our crew rolled up their sleeves and went to work.

For this particular undertaking we did quite a bit of work on the interior. Let’s face it, and especially once you see the video you’ll see that she was quite dirty.

We cleaned and conditioned the vinyl seats. For this we use an all purpose cleaner that also conditions. It’s a nice combo and we’re quite fond of it. But before we could do this we had to rid the surfaces of any mold or mildew. This is quite common, since, well — boats get wet!

We also vacuumed and cleaned around the cup holders and we certainly made sure that all storage compartments would pass the test. 

The windows were also taken care of and the hull was polished, but prior to this we had power-washed and scrubbed the exterior to prime the surface first.

The final result had this Moomba looking light years beyond where she started at.

Tige Z1 Boat Cleaning

Tige Z1 Boat Cleaning

Recently we had a Tige z1 come through our shop. This boat is equipped with a Wet Sounds audio system and the legendary TAPS Surf System (Tige Adjustable Performance System); which gives you full control over the list, yaw, draw and the overall wake control. This boat is a wake boarder’s dream!

Now it was time for us to step in and do-what-we-do. An in-depth boat cleaning was in store first, so we set to work power washing the cover, steam cleaning the exterior, cleaning down the vinyl throughout the interior of the Tige with an all-purpose cleaner and then cleaning the tower and bimini. Next, we vacuumed every, little crevice and compartment and conditioned the vinyl to keep it hydrated and fresh.

Overall the work was very satisfying and it’s always a sight to behold when you get these boats, like the Tige Z1 out into the open and into the sunlight. They just gleam brighter than the sun!

Detailing a Supra SA350

Detailing a Supra SA350

This 2013 SA350 powered by a 57MR V8 motor is just killer looking. It’s got attitude and a very pleasing design to it and the interior is comfortable, accommodating and attractive. You can’t beat that.

We did quite a bit of work on this boat during the detailing process. The hull was scrubbed and hand-washed first. Then we cleaned all of the interior vinyl and made sure that any cushions were cleaned up to standards.

Next we vacuumed out any and all compartments and proceeded with scrubbing the floor. Finally, the tower and bimini were cleaned and we performed a single-stage polish on the exterior.

Detailed Boat Cleaning of an Ultra 2500 Pontoon

Detailed Boat Cleaning of an Ultra 2500 Pontoon

This Pontoon arrived to us in some pretty bad shape, but we see this a lot. Over time the elements of mother nature really have their way with these kinds of boats and the vinyl seating begins to take on mold and stains.

The first thing we did as we worked our way through this pontoon was to power wash the carpet. We really worked on this part and blasted all of the dirt and grossness out of it using a powerful all purpose cleaner. Then we used a carpet extractor to suck up all of the remaining water and moisture.

Then it was time to kill off any mold or mildew as we found it. While we were cleaning this boat we attacked any stains as well. There were a lot of these. There was a lot of scrubbing involved.

Finally we used one of our favorite boat care products. A little beauty called Hula Boat Care which is an all-in-one cleaner and conditioner. We used this on all the vinyl to both clean it and at the same time make it re-hydrated and supple again.

The video really lays out everything that we did and you won’t believe the condition of this boat when you watch it. Lots of good before and after footage that really demonstrates just effective this type of boat cleaning can be.



Detailing a Chris Craft Corsair 36

Detailing a Chris Craft Corsair 36

Elegant, sleek, sophisticated. Those are just some of the words when the Corsair 36 is out of the water and you’re staring down the hull.

It’s a great boat with 6′ 2″ of headroom in the cabin and even comes with its own galley and dinette table. For a comfortable outing on the water you really can’t beat this.

We put a lot of heart-and-soul into the exterior of this vessel with a full, single-stage polish and a layer of ceramic coating for added protection. It was a lot of boat to cover, but well worth it.

Ceramic Coating on a Nautique GS22 Boat

Today we’re showing you just how effective a layer of ceramic coating can be when applied to a boat like this one, the Nautique GS22. This boat road it out through serious flood conditions back in Oct of 2018 not far from Austin, TX.

We had previously ceramic coated this boat and in this video you can see perfectly well how responsive the ceramic coating is to being cleaned and beading up water.

We used a steamer on this one, but that’s the luxury of doing what we do on a professional level. You don’t even need that once you have your boat ceramic coated.

Detailing a Bennington 2275 GL Pontoon Boat

Detailing a Bennington 2275 GL Pontoon Boat

Today we got to detail a 2007 Bennington that measures 21 feet of pure fun. It’s a nice fishing boat with a 50HP engine made by Yamaha; which can entertain up to 11 people if you so desire.

We acid-washed the pontoons, cleaned the covers and cleaned the bimini. Also did a full interior detail which included scrubbing the seats, UV protection and conditioning, cleaning all the wells underneath the seats and cleaning the carpet..

These Benningtons are really nice and casual and they even feature a fishing-rod holder upgrade; which is definitely a nice touch. This particular boat was fairly mucky, so we really took our time with the pontoons, because they obviously needed some lovin’.

Watch the video and you’ll see the huge difference that a boat detailing can make. She went from murky and haggard-looking to brand spankin’ new.

Detailing a 2016 Tige RZX

by boatbeautiful
Detailing a 2016 Tige RZX

What a magnificent treat of a boat that we had the great opportunity to get our hands on! The Tige has features that’ll make any boating enthusiast drool such as the TAPS 3 Surf System and the Tige Touch2 Interface.

It’s loaded with a Indmar Raptor 440 engine with around 400HP, has the patented Convex V hull and can support up to 16 people; making it ideal for family outings.

We gave this little angel our fullest attention. A full detail interior, exterior washing, exterior correction, a decontamination prep and finally a thorough ceramic coating.

Check out the video above to see from start-to-finish what a full boat detail looks like when you work with us. We love what we do and strive for perfection and excellent.

She was already beautiful, but this time we made her BoatBeautiful!

Call Now Button